Description
1019072, Baileigh WR-32, 220V 1Ph 2ft x 3ft CNC Router Table
The WR-32 CNC router table comes with software, tooling, and a dust shroud—often not included with competing tables that cost more. Built to last with a cast iron base, the metal router arrives fully assembled.
Features:
- 2’ x 3’ CNC router table for metal
- Recommended for sign-makers, hobbyists, molding companies (plastic parts), research and development (R&D) shops, and industrial wood shops.
- Powerful 4.75 hp spindle.
- Up to 18,000 rpm variable spindle speed.
- Runs on 220-volt single-phase power.
- Easy-to-learn design software; just install it onto your computer and start creating patterns. (Details below.)
- Upload your design file to the table via a USB drive, then use the convenient handheld controller to move the spindle.
- Stepper motors move the spindle at a maximum speed of 6.5″ per second.
- Ball screw X and Y-axis movement for accurate positioning.
- Square slideways clamp the material down and keep it in alignment.
- 4 collets choices,1/8”, 4mm, 6mm, and 1/2″ (1 each) in the ER25 style.
- Comes standard with 15 starter router profiles.
- Air-cooled spindle prolongs machine life and helps to maintain high cut quality down the road.
- 4 T-slotted clamps fit on the table to hold the material down for clean cuts.
- The structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
- The table ships pre-built with correct alignment for a fast and simple set-up—just an hour or so to uncrate the table and get started with the software.
- Rigid cast base and fully-welded steel frame reduce vibrations, so the table can cut correctly over decades of use.
- Dust shroud fits over the spindle and vacuums sawdust off the table while you cut, keeping your shop neat.
- Covered by a 1-year parts warranty.
- Lifetime technical support by phone: you can call our experienced reps whenever you have a question or need troubleshooting.
Specifications:
- Item Number: WR-32
- Shipping Weight: 1100 lbs
- Actual Working Area: 23.6” x 35.4” x 5.12”
- Table Size (Length): 53.5″
- Table Size (Width): 43.25″
- Spindle: Air-cooled spindle
- Z Axis Stroke: 3.1″
- Maximum Moving Speed (Inches Per Minute): 590
- Maximum Engraving Speed (Inches Per Minute): 394
- Reposition Accuracy: .0019″
- Tool Diameters: ER25 Style in 1/8”, 4mm, 6mm, and 1/2″ (1 each)
- Power: 220V Single Phase
- Horse Power: 4.75hp (3.5kw)
- Weight (lbs): 728
- Table Style: T-Slot
- Notes: Applicable Material: Acrylic, Copper, Aluminum, Wood, PVC, ABS, Insulation Plate, Bakelite Plate, Honeycomb Plate, Resin, Organic Board, Aluminum Composite Panel
- Shipping Dimensions (Inches): 59 x 48 x 59
Reviews
There are no reviews yet.